EPS caps | PVC cutting tools | ø 67 mm, ø 70 mm
EPS cap / white - smooth / ∅ 67 x 18 mm
PVC cutting tool / red / ∅ 67 mm
EPS cap / grey - smooth / ∅ 70 x 15 mm
EPS cap / white - with printing / ∅ 70 x 18 mm
PVC cutting tool / blue / ∅ 70 mm
EPS cap for covering inserted disc anchors in polystyrene insulating plates in the contact insulation system – ETICS.
PVC cutting tool
for inserting disc anchors (except for EJOT – STR U) into polystyrene
heat-insulating plates in the contact insulation system – ETICS.
Material:
- cap: extruded polystyrene
- cutting tool: mechanically resistant PVC
Application – advantages:
Cap:- savings by using 15 – 18 mm shorter anchors
- cap with printing - production by foam-filled moulding ensuring a permanent geometric accuracy of the cap
- the cap with printing is slightly conical; when pressed in a milled hole holds firmly
- the insulating plate surface with plugs is flat, plugs do not need to be sealed
- perfect thermal bridge of anchors prevention
Cutting tool:
- for inserting anchors with disc diameters 60 mm and 65 mm in polystyrene insulation plates
- easy clamping of the hexagon shank in the drill chuck
- hole cutting does not influence radically the total installation time
Type | Order No. | Package (pcs) |
EPS cap / white - smooth / ∅ 67 x 18 mm | 285.67 | 250 |
PVC cutting tool / red / ∅ 67 mm | 282.67 | 1 |
EPS cap / grey - smooth / ∅ 70 x 15 mm | 285.70.01 | 200 |
EPS cap / white - with printing / ∅ 70 x 18 mm | 285.70 | 200 |
PVC cutting tool / blue / ∅ 70 mm | 282.70 | 1 |
Other items in this section:
- eco-drive 8 with metal screw
- eco-drive 8S with metal screw
- EDST assembling tool
- Wkret-met FIXPLUG-8 with plastic pin
- Wkret-met FIXPLUG-10 with plastic pin
- Wkret-met WKTHERM-8 with metal pin
- Wkret-met WKTHERM-8S with metal screw
- Wkret-met LTX-10 with plastic pin
- Wkret-met LMX-10 with metal pin
- Wkret-met LTX-8 with plastic pin
- Wkret-met LMX-8 with metal pin
- Wkret-met LFN-10 with plastic pin
- Wkret-met LFM-10 with metal screw
- Wkret-met LFN-8 with plastic pin
- Wkret-met LFM-8 with metal screw
- BRAVOLL PTH 8/60 with plastic pin
- BRAVOLL PTH-SX 8/60 with plastic screw
- BRAVOLL PTH 10/60 with plastic pin
- BRAVOLL PTH-KZ 8/60 with metal pin
- BRAVOLL PTH-S 8/60 with metal screw
- BRAVOLL – MPS | BRAVOLL – ZP | INSULATING CAPS IZ-EPS, IZ-MW
- KOELNER KI-10 with plastic pin
- KOELNER KI-10N with metal pin
- KOELNER KI-10NS with metal screw
- KOELNER TFIX-8M with metal pin
- EPS cap | MW cap | Insulator cutting tool | ø 65 mm
- Wkret-met TDX 140, TDX 90 additional discs
- KOELNER KWL 140 PP additional disc
- BRAVOLL IT PTH 140, IT PTH 100 additional discs
- EJOT SBL 140 plus, VT 90 additional discs
- ETICS/EWI
profiles and accessories for thermal insulation- Base profiles, closing profiles and accessory
- Corner profiles with mesh, stop and joint profiles
- Window profiles and accessories
- Movement profiles
- Fibre glass reinforcement meshes
- Groove profiles
- Facade anchors
- Insulation holders
- Electric installation in the insulation system
- Balcony profiles and accessories
- Ventilation grills, bathtub doors
- VENTILATED FACADES
Profiles and accessories - PLASTERS INNER/OUTER
Profiles and accessories - PLASTERBOARD CONSTRUCTIONS, EARATED CONCRETES - Profiles and accessories
- CONCRETE REINFORCEMENTS
Profiles and accessories - GEOTEXTILES, DRAINAGE SHEETS, ROOFS
Fabrics, sheets, foils and accessories